View full version: Pluto Main Installation & IR codes
« 1 2 3 4 5 6 »
  1. Remote Control and LIRC Questions
  2. Install error with Initial_Config_Core.sh
  3. Interesting hybrid dvb and analog cards
  4. bridge network interfaces
  5. Installation issues on .31
  6. TV Card in Core or MD
  7. Upgrading to 2.0.0.33
  8. CM11A Not recognized. getting libserial.so not found
  9. SAMBA customization
  10. SCSI Drives not recognized
  11. Network configuration after a new install
  12. Add Hard Drive?
  13. Minimal hardware for test setup
  14. Install MD on local hard drive
  15. IRTrans, ethernet
  16. Kickstart CD Install pb
  17. 2.0.0.32 installation kernel panic
  18. Older Epia Motherboard problems.
  19. CM11 used as a security interface
  20. Install from KickStart CD behind a proxy server
  21. Lirc and the Aopen EA65
  22. MythTV Setup Problem on a Hybrid
  23. GSD problem
  24. Pluto Hangs on Reboot
  25. DHCP server disabled at first, then enabled?
  26. How to add support for other remotes for Lirc ?
  27. Hybrid on VIA (Nehemiah) HowTo
  28. SigmaTel stir4200 dongle
  29. Problems with resolution on Core/Hybrid.
  30. Creating a new class of Media Director
  31. KickStart CD hangs
  32. LIRC problems after upgrade (pwc solved) ....
  33. nvidia support
  34. MythTV and PVR350 Setup
  35. Upgrade from .29 to .30 - Houston, we have a problem ....
  36. Tuner driver modules and kernel sources
  37. Beginner: Configuration of Plutohome
  38. Setting root password - only asks once
  39. play dvd across network
  40. European hardware
  41. PVR-350
  42. LIRC and pwc problems after upgrade....
  43. Problem with starting asterisk and bttv
  44. IR Transmitter
  45. Pluto working on a VIA EPIA pc
  46. SqueezeBox Configuration
  47. How to add support for lirc_i2c for PVR250 cards
  48. Few minor infrared remote navigation problems ...
  49. 0.27 boot, 0.28 will not,0.29 will not
  50. Moon2, still in the dark.