The Firecracker is able to transmit X10 lighting commands and the data is send on an RS232 port using the control-lines. The Firecracker uses the US 310MHz RF frequency only.www.rfxcom.com
sells an USB RF transmitter that is able to transmit X10 lighting AND X10 security commands. There is an US version (310MHz) and a European version (433.92MHz) available. The USB devices use a VirtualComPort protocol and a Linux driver is available.
They also have USB RF receivers for:
- X10 310MHz (US)
- X10 433.92MHz (European)
- Visonic alarm systems
All receivers have a 32 bits mode which is compatible with the W800. Additionally they have a variable length receiving mode so that receiving of the Digimax (European thermostat) is also possible.
The Visonic receiver translates the received sensor signals to X10 equivalents so that the software only has to be programmed for X10 sensors.
One USB interface can have 2 receivers so that a Visonic and an X10 receiver can co-exist in one USB interface and both signals are available to the software.
The RFXSensor wireless RF temperature, humidity and barometric pressure sensors can be received by the RFXCOM receiver and also by the W800.
Soon the RFXPower will be released. This is a Power Metering device with RF transmitter. The 48 bits data can be received by the RFXCOM X10 receiver.