I have a working install of Dianemo S. Works great with the IP Cameras and kmotion (quick note on that, make sure to check the kmotion_rc file as it contains a storage limitation that will need to be changed if you want any decent archiving).
I am having problems with the CM15A. I had it running on linuxmce previously, and I know it's still working as the X10 RF remote control sends signals that get converted by the CM15A to wireline X10 and acted upon by the receivers.
I can see the CM15A when running 'lsusb':
Bus 006 Device 002: ID 0bc7:0001 X10 Wireless Technology, Inc. ActiveHome (ACPI-compliant)
I also have it configured in pluto-admin (device template CM15A #2057) but no luck getting it to start / registered. It is enabled, and controlled via the core.
Clue: when I run '/usr/pluto/bin/Start_LocalDevices.sh' manually, it comes back with the following message:
Start_LocalDevices.sh (server) Child device (52) was configured but the startup script (CM15A) is not available in /usr/pluto/bin.
I tried running 'sudo apt-get update; sudo apt-get install pluto-cm15a' but the system can't find the package anywhere. Is this something specific to my system, or is Dianemo S missing a package ?