Author Topic: [SOLVED] - The target device 20 (routed to 20) has not registered. <0xb6e27b90>  (Read 856 times)

pw44

  • Addicted
  • *
  • Posts: 653
    • View Profile
Hia,
i'm getting some weird errors, after a fressh new install.
On DCERouter.log, i've found some entries like:
Code: [Select]
The target device 20 (routed to 20) has not registered. <0xb6e27b90>
The target device 21 (routed to 21) has not registered. <0xb6d08b90>
The target device 46 (routed to 46) has not registered. <0xb6d08b90>
and
Code: [Select]
The target device 46 (routed to 46) has not registered. <0xb6d08b90>
05      09/08/10 11:32:29.018           Socket::ReceiveData 0x9a23f2b8 failed, bytes left 0 start: 620000 1: 0 1b: 0 2: 0 2b: 0 m_Socket: 130 Incoming_Conn Socket 130 127.0.0.1 <0x841d3b90>
05      09/08/10 11:32:29.018           Socket::ReceiveString2 ReceiveData failed m_Socket: -1 Incoming_Conn Socket 130 127.0.0.1 <0x841d3b90>
05      09/08/10 11:32:29.018           TCPIP: Closing connection to -1003 (Router Dev #0) 0x9a23f2b8 m_Socket: -1 <0x841d3b90>
05      09/08/10 11:32:29.018           Router::RemoveAndDeleteSocket 0x9a23f2b8 -1003 <0x841d3b90>
05      09/08/10 11:32:29.226           Socket::ReceiveData 0x9a24f1d0 failed, bytes left 0 start: 640000 1: 0 1b: 0 2: 0 2b: 0 m_Socket: 145 Incoming_Conn Socket 145 127.0.0.1 <0x7a1bfb90>
05      09/08/10 11:32:29.226           Socket::ReceiveString2 ReceiveData failed m_Socket: -1 Incoming_Conn Socket 145 127.0.0.1 <0x7a1bfb90>
05      09/08/10 11:32:29.226           TCPIP: Closing connection to -1003 (Router Dev #0) 0x9a24f1d0 m_Socket: -1 <0x7a1bfb90>
05      09/08/10 11:32:29.226           Router::RemoveAndDeleteSocket 0x9a24f1d0 -1003 <0x7a1bfb90>

For device 21 (21_LaunchOrbiter.sh.log), i've found the following entries.
I don't know why this is happening, but the effect is the freezed OSD.

Code: [Select]
05      09/08/10 9:15:07.977            FocusIn! <0xb5a9b6d0>
05      09/08/10 9:15:07.977            FocusOut! <0xb5a9b6d0>
05      09/08/10 9:15:07.978            FocusIn! <0xb5a9b6d0>
01      09/08/10 11:22:34.491           WmCtrl::LowLevelCommand Cannot open display. <0xb5a9ab90>
01      09/08/10 11:22:34.492           WmCtrl::LowLevelCommand Cannot open display. <0xb5a9ab90>
01      09/08/10 11:22:34.492           WmCtrl::LowLevelCommand Cannot open display. <0xb5a9ab90>
01      09/08/10 11:22:34.492           WmCtrl::LowLevelCommand Cannot open display. <0xb5a9ab90>
01      09/08/10 11:22:34.493           WmCtrl::LowLevelCommand Cannot open display. <0xb5a9ab90>
01      09/08/10 11:22:34.493           WmCtrl::LowLevelCommand Cannot open display. <0xb5a9ab90>
01      09/08/10 11:22:34.494           WmCtrl::LowLevelCommand Cannot open display. <0xb5a9ab90>
01      09/08/10 11:22:34.494           WmCtrl::LowLevelCommand Cannot open display. <0xb5a9ab90>
01      09/08/10 11:22:34.495           WmCtrl::LowLevelCommand Cannot open display. <0xb5a9ab90>
01      09/08/10 11:22:34.495           WmCtrl::LowLevelCommand Cannot open display. <0xb5a9ab90>
01      09/08/10 11:22:34.496           WmCtrl::LowLevelCommand Cannot open display. <0xb5a9ab90>
01      09/08/10 11:22:34.496           WmCtrl::LowLevelCommand Cannot open display. <0xb5a9ab90>
01      09/08/10 11:22:34.496           WmCtrl::LowLevelCommand Cannot open display. <0xb5a9ab90>
01      09/08/10 11:22:34.497           WmCtrl::LowLevelCommand Cannot open display. <0xb5a9ab90>
01      09/08/10 11:22:34.497           WmCtrl::LowLevelCommand Cannot open display. <0xb5a9ab90>
01      09/08/10 11:22:34.497           WmCtrl::LowLevelCommand Cannot open display. <0xb5a9ab90>
01      09/08/10 11:22:34.498           WmCtrl::LowLevelCommand Cannot open display. <0xb5a9ab90>
01      09/08/10 11:22:34.498           WmCtrl::LowLevelCommand Cannot open display. <0xb5a9ab90>

The DCERouter.log is at http://pastebin.org/826164
Any hint of what could be happening?

TIA
« Last Edit: September 12, 2010, 01:38:26 am by pw44 »

myster

  • First post!
  • Posts: 1
    • View Profile
Re: The target device 20 (routed to 20) has not registered. <0xb6e27b90>
« Reply #1 on: September 11, 2010, 05:33:33 am »
I've got the same thing going on but only notice it when starting a game.  Game crashes right away the goes right back to screensaver.

Any solution?

08      09/10/10 21:07:12.913           Received Message from 10 (Media Plug-in / Living Room/Family Room) to 52 (Game Player / Living Room/Family                   Room), type 1 id 193 Command:Off, retry none, parameters: <0xa9940b90>
08      09/10/10 21:07:12.913             Parameter 97(PK_Pipe): -1 <0xa9940b90>
08      09/10/10 21:07:12.914           Received Message from 10 (Media Plug-in / Living Room/Family Room) to 20 (The core/hybrid / Living Room/Fa                  mily Room), type 1 id 192 Command:On, retry none, parameters: <0xa9940b90>
08      09/10/10 21:07:12.914             Parameter 97(PK_Pipe): 0 <0xa9940b90>
08      09/10/10 21:07:12.914             Parameter 98(PK_Device_Pipes):  <0xa9940b90>
05      09/10/10 21:07:12.914           The target device 20 (routed to 20) has not registered. <0xb6525b90>
01      09/10/10 21:07:12.915           debug_stream_end MediaStream::~MediaStream c1 1002/0x9380390 <0x9010db90>


tschak909

  • LinuxMCE God
  • ****
  • Posts: 5476
  • DOES work for LinuxMCE.
    • View Profile
Re: The target device 20 (routed to 20) has not registered. <0xb6e27b90>
« Reply #2 on: September 11, 2010, 11:21:49 pm »
Guys, Device 20 is a device that does not have a DCE device, therefore it does not register.

The issue you are seeing with the game player is because mame or mess did not like something, and when it quit, the game player sent an event to stop the media stream. run the game outside the orbiter to see what it is complaining about.

-Thom