Author Topic: How to replace a Core  (Read 3090 times)

Beeker

  • Guru
  • ****
  • Posts: 267
    • View Profile
How to replace a Core
« on: February 18, 2011, 12:07:08 pm »
Question for the experts
I have an existing Core/Hybrid with a software RAID and I am taking Thom C's advice and others of using a server board and building a new Core/Hybrid then moving to an external NAS rather than a software RAID. Question is after I build the new Core and set the IP address to the addresses I was using on the old core, then just change the IP address of the old core to be able to move the content from the software RAID to the external NAS before converting the old core/hybrid to another external NAS

Thanks
Beeker 

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4660
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Re: How to replace a Core
« Reply #1 on: February 18, 2011, 01:32:43 pm »
Question for the experts
I have an existing Core/Hybrid with a software RAID and I am taking Thom C's advice and others of using a server board and building a new Core/Hybrid then moving to an external NAS rather than a software RAID. Question is after I build the new Core and set the IP address to the addresses I was using on the old core, then just change the IP address of the old core to be able to move the content from the software RAID to the external NAS before converting the old core/hybrid to another external NAS

Thanks
Beeker 

I would suggest buying the new external NAS first. Attach that to the LAN side of your existing Core (with the software RAID) and allow it to be detected and also allow the share on the NAS to be detected etc and choose the 'Use LinuxMCE file Structure' option etc etc. Now just copy your media from the software RAID partition to your NAS (dont forget to copy any .id3 files too)

When thats done you can power down the system and rebuild your Core in the safe knowledge that all your media is on the new NAS

All the best


Andrew
Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses http://forum.linuxmce.org/index.php?topic=14026.0

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: http://wp.me/P4KgIc-5P

Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

http://www.dianemo.co.uk

Beeker

  • Guru
  • ****
  • Posts: 267
    • View Profile
Re: How to replace a Core
« Reply #2 on: February 18, 2011, 01:41:32 pm »
Will do thanks Andrew

Regards
Beeker